Wurth D3 PVA Wood Glue Adhesive
£11.65
Taxes included.
Shipping calculated at checkout.
Professional Quality Wurth D3 PVA Wood Glue Adhesive
Extended opening time
Modified mix provides higher performance with pine
Additive is only effective for 24 hours
One part modified polyvinyl alcohol stabilised vinyl acetate homopolymer emulsion, containing coalescing solvent
May be used with hot or cold presses
May be cured by radio frequency bonding
Conforms to the wear resistance requirements of DIN 68602 to Category B
Conforms to BS 4071 in respect of bond strenth resistance to sustained load and freeze thaw stability
Technical information
Colour
White
Chemical basis
Polymer
Container
Plastic bottle
Weight of content
1 kg approximately 1 Litre
Min. film forming temperature
2 �C
Min./max. pressing pressure
0-30 psi
Min./max. wood moisture
0-12 %
Min./max. application quantity in surface bonding
150-150 g/m�
Application area
Plywood, chipboard, decorative laminate and more.
Instructions
Bonding conditions:The adheisve substrates and ambient temperature should ideally be at a minimum 20�C (68�C). The moisture content of wood materials should be uniform and not exceed 12%.Spreading:The adhesive can be applied by serrated glue spreader roller or brush. Application is normally to one surface at a rate of 150gm/m� (0.5 ozs / sq. ft).Maximum 30 minutes depending on materials to be bonded. Assembly times should be minimised at low wood moisture.Pressure:Pressure must be applied whilst the adhesive is still wet and should be a minimum of 30psi (2kg/cm�) depending on type of wood and structure
Extended opening time
Modified mix provides higher performance with pine
Additive is only effective for 24 hours
One part modified polyvinyl alcohol stabilised vinyl acetate homopolymer emulsion, containing coalescing solvent
May be used with hot or cold presses
May be cured by radio frequency bonding
Conforms to the wear resistance requirements of DIN 68602 to Category B
Conforms to BS 4071 in respect of bond strenth resistance to sustained load and freeze thaw stability
Technical information
Colour
White
Chemical basis
Polymer
Container
Plastic bottle
Weight of content
1 kg approximately 1 Litre
Min. film forming temperature
2 �C
Min./max. pressing pressure
0-30 psi
Min./max. wood moisture
0-12 %
Min./max. application quantity in surface bonding
150-150 g/m�
Application area
Plywood, chipboard, decorative laminate and more.
Instructions
Bonding conditions:The adheisve substrates and ambient temperature should ideally be at a minimum 20�C (68�C). The moisture content of wood materials should be uniform and not exceed 12%.Spreading:The adhesive can be applied by serrated glue spreader roller or brush. Application is normally to one surface at a rate of 150gm/m� (0.5 ozs / sq. ft).Maximum 30 minutes depending on materials to be bonded. Assembly times should be minimised at low wood moisture.Pressure:Pressure must be applied whilst the adhesive is still wet and should be a minimum of 30psi (2kg/cm�) depending on type of wood and structure
Shipping & Returns
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
Our Delivery times are 2 - 5 working days
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
Shop The Full Collection
